DPA 6066-OC-R-B03 d:fine CORE 6066 Omni Headset Microphone, Black, 3-Pin LEMO
The capsule of the 6066 CORE Subminiature Headset is just 3 mm (0.12 in) in diameter, but packs the audio power of larger, award-winning DPA mics. Despite its small size, it is abundant in clarity, consistency and durability three qualities that truly matter. By shrinking our newly introduced CORE by DPA technology, we ensure you don’t have to compromise on sound to focus on aesthetics.
Beyond this minimized size and maximized sound potential, these mics also sport a completely redesigned, lightweight, one-size-fits-all headset that attaches over the ears for maximum comfort. 3-point ear grips with spring mechanisms help grip below the ears and to the side of the head for added security. A 2-way adjustable boom system (length and height) with an anti-rotate mechanism makes this new headset very easy to fit. A new 90 cable management system safeguards the cable and directs it down the wearer’s back, where it can’t be seen.
Between the sound quality and the comfort, once you try it we’re sure you’ll never want to wear another headset mic solution.
IP58 certified
The CORE Subminiatures, are IP58 certified. This durability is achieved through a number of defense mechanisms:
Water-repellant nano-coating of the cover and housing
Hermetic sealing of the sensitive amplifier at the core of the mic
Dual gold plating of the diaphragm
Technical Specifications
Directional pattern
Omnidirectional
Principle of operation
Pressure
Principle of operation
Pre-polarized condenser
Effective frequency response
20 Hz – 20 kHz
Frequency range, +/-2 dB
40 Hz – 20 kHz with 4 dB soft boost at 8 – 20 kHz
Sensitivity, nominal, +/-3 dB at 1 kHz
6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Typ. 26 dB(A) re. 20 uPa (max. 28 dB(A))
Total harmonic distortion (THD)
< 1% up to 128 dB SPL peak
Dynamic range
Typ. 102 dB
Max. SPL, peak before clipping
144 dB
Rated output impedance
From MicroDot: 30 – 40 OHM. From DAD6001-BC: 100 OHM
Cable drive capability
Up to 300 m (984 ft) with DAD6001-BC XLR adapter
Power supply (for full performance)
Min. 5 V to max. 10 V through DPA adapter for wireless systems. With DAD6001-BC: 48 V phantom power +/-4 V for full performance. Works from 12V
Connector
MicroDot, TA4F Mini-XLR, 3-pin LEMO, Mini-Jack
Color
Black or beige
Weight
11 g (0.40 oz) incl. Cable and MicroDot connector
Microphone head size (h x w x d)
3.4 / 8.9 mm (0.13 / 0.35 in)
Capsule diameter
3 mm (0.12 in)
Cable length
1.3 m (4.3 ft)
Polarity
Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range
-40C to 45C (-40F to 113F)
Relative humidity (RH)
Up to 90%
