Electro-Voice ZX5-60 All-Weather 15-Inch Two-Way Passive Loudspeaker White
The Electro-Voice ZX560 All-Weather 15-Inch Two-Way Passive Loudspeaker | White is the new standard of no compromise audio performance and versatility in a simple to use, compact package. At its heart are the transducers. First is the DVX3150 high performance low frequency transducer. EV used advanced computer aided design techniques to create forced air, directional voice coil cooling for high power and efficiency. Finite element analysis was used to optimize the suspension and magnetic structure for long, linear travel to provide low distortion and greater LF extension. These features and details, such as forged magnetic components and special materials, provide reliability with a 500W power rating in a lightweight transducer. Next is the ND2, a 2-inch voice coil compression driver based on neodymium motor structure to allow for maximum output while reducing size and weight to a minimum. Its precision phasing plug and titanium diaphragm provide better HF performance, while the integral heatsink provides cooling for high power output. The high tech enclosure uses injection-molded high-impact polypropylene structural foam to make the Zx5 incredibly durable. The enclosure geometry elements have been carefully designed to provide maximum rigidity and bass response. By design the Zx5 is also a perfect solution for stage monitors by allowing two angles (45° or 55°) without any additional accessories. Two coverage patterns are available; 60° x 60° coverage for long-throw and cluster applications, 90° x 50° coverage for wider coverage or shorter distances. The Zx5 is equipped with three anchor plates for rigging with single stud-fittings, along with two more possible anchor plate attachment points on the bottom. For permanent suspension or attaching brackets, the Zx5 also has two M8 inserts on the top and bottom, two under the handle, and four on the back of the enclosure, for a total of 10.
Key Features
-
DVX3150 15” LF Transducer with Forced Air Cooling
-
ND2 2” Voice Coil, 1” Exit Neodymium Compression Driver
-
60° x 60° Coverage Pattern
-
600W Continuous (2400W) Power Handling
-
High Sensitivity, 132 dB Maximum SPL
-
Adjustable Monitor Angle (45° or 55°)
-
3 Anchor Plates for Single Stud Fittings and 10 Integral Suspension Points
-
Available in Black or White
-
Passive/Biamp Selectable
-
Full Line of Accessories
Technical Specs
Frequency Response (-3dB)
58 Hz – 18 kHz
Frequency Range (-10dB)
39 Hz – 20 kHz
Rec. Hipass Frequency
36 Hz
Axial Sensitivity
98 dB (1W/1m)
Max.CalculatedSPL
132 dB
Horizontal Coverage
60degrees
Vertical Coverage
60degrees
Power Handling (Passive)
600W Continuous, 2400W Peak
LF Power Handling (Biamp)
500W Continuous, 2000W Peak
HF Power Handling (Biamp)
40W Continuous, 160W Peak
LF Transducer
DVX3150, 15-in. (381mm) Driver
HF Transducer
ND2, 1-in. (25.4mm) exit Neodymium Compression Driver
Crossover Frequency
1.5kHz
Nominal Impedance
8Ohms
Minimum Impedance
6.5Ohms
Connectors
Neutrik Speakon NL4’s (2)
Enclosure Material
Polypropylene Strcutural Foam
Suspension
Enclosure has locations for 5 Single-Stud Attachment Plates and 10 Forged Steel Eyebolts – 2 on top,
2 on bottom, 2 on side, and 4 on rear of enclosure
Grille
Polyester Powder Coated, 16GA Galvanized Steel, with Rotatable Logo
Environmental Spec
IEC 529 IP24 / IP44 (PI Version)
Dimensions (H x W x D)
692mm x 446mm x 411mm (27.26” x 17.57” x 16.16”)
Net Weight
22.2kg (49.0lbs.)
