Radial Headload Prodigy Combination Load Box and DI
With the Headload Prodigy, you can crank your amp to the sweet spot while keeping output levels in check, allowing you to retain your optimal tone when performing, recording and practicing. The Prodigy can pass 25%, 50% or 100% of the signal from the amp head to the speaker cabinet, or it can also be used without a speaker cabinet for completely silent recording. This is particularly useful in small venues where the speaker cabinet on stage may conflict with the sound in the room, and It’s also great for silent recording where you want to take advantage of ‘high power’ amp distortion without upsetting the neighbours. A balanced DI output features Radial’s popular JDX Reactor circuit, which emulates the tone of a 4×12 half stack for a realistic and consistent tone through the PA or when connected to a recording interface.
Key Features
- Load box with selectable output levels or complete attenuation
- Drive your amp hard for the best tone
- Can handle up to 100 watts RMS
- Balanced JDX direct out feeds the PA or a recording interface
- Built-in headphone amp for practicing
Technical Specifications
Audio circuit type
Passive attenuation circuit with active equalization
Frequency response
Shaped to emulate a classic guitar cabinet
Gain
-30dB/-42dB
Total harmonic distortion
0.05%
Intermodulation Distortion
0.05%
Output Impedance
8 speaker load
Noise
-106dBu
Maximum Input
100 watts continuous
Maximum Output
100%, 50%, 25%, 0%
Construction
14-gauge steel chassis & outer shell
Size (L x W x D)
10.25” x 5.9” x 3.75” (26cm x 15cm x 9.5cm)
Weight
5.3lbs (2.4kg)
Shipping size (L x W x D)
14.5” x 8.75” x 4.75” (36.8cm x 22.2cm x 12.1cm)
Shipping weight
6.5lbs (2.9kg)
Power
Radial +/-15V 400mA power supply
Conditions
For use in dry locations only between 5°C and 40°C
